Over 40 Years in BusinessISO 27001 compliantPublic sector: GSA contract holder

LA 562-298-5000 · Chicagoland 312-432-5300 · Phoenix 602-733-6807 · Client Support

WAN and SD-WAN in the East Valley: Chandler, Tempe and Mesa

WAN and SD-WAN in the East Valley for organizations: BTI designs, installs and supports WAN and SD-WAN from BTI's Phoenix office.

Phoenix office hours: open 24/7. Emergency support is available 24/7. Call 800-435-7284.

Free consultation

Communication

Let's Start a Conversation

What's the best way for us to contact you?

No cost, no obligation. Business inquiries only. Never send passwords, license keys or other credentials through this form. Already a BTI client? Use the dedicated support number assigned to your organization.

WAN and SD-WAN for East Valley organizations

East Valley organizations use WAN and SD-WAN to connect Chandler plants, Tempe offices and Mesa or Gilbert warehouses along Loop 101, Loop 202, US-60 and I-10. This page is about wide area network design, installation and support. It is not East Valley Rides, not a shipping line, and not an electrical contractor with a similar name. It is also not a generic managed IT page and not BTI's Phoenix WAN page, which is linked for metro-wide terms.

BTI designs, installs and supports WAN and SD-WAN for organizations, including internet failover and written support after go live. East Valley work is supported from BTI's Phoenix office, about 8 to 25 miles from most sites. The Phoenix office is open 24/7. Emergency support is available 24/7.

Call the Phoenix IT team at 480-272-8728.

Next step: Book a free consultation

The short answer for East Valley businesses

BTI designs, installs and supports WAN and SD-WAN for organizations, including internet failover and written support after go live.

Design, installation, circuits, equipment and support are separate choices, written into the proposal. This page is for organizations in the East Valley. It is not a ride service, a shipping line, an electrical contractor, a generic managed IT page or BTI's Phoenix WAN page.

Know what will be delivered and who owns the result

Documented design

Sites, circuits, routing or SD-WAN policies, failover and acceptance checks defined before equipment is ordered or circuits are requested.

Itemized proposal

Circuits, equipment, labor, support and assumptions listed together, so you compare the complete scope rather than a headline price.

Cutover and support

Failover and applications are tested, a named owner is left for changes, and renewals are written down.

What happens after you send the form

The Phoenix IT team reviews your sites, confirms the scope by phone and schedules a survey before any design is priced.

Next step: Book a free consultation

WAN and SD-WAN approaches BTI installs in the East Valley

SD-WAN, traditional WAN paths and internet failover are chosen for how East Valley sites actually work. The choice is written into the design. Ask for an itemized quote for circuits, equipment, labor and support.

WAN diagram used to explain WAN and SD-WAN design in the East Valley
SD-WAN and WAN path diagram for organizations in the East Valley

An East Valley WAN and SD-WAN scenario

Picture a Tempe professional firm that added a Chandler warehouse and a Mesa office. Each site has its own internet service, a VPN was added later, and a circuit outage left the warehouse unable to print labels for half a morning. This is a planning scenario, not a claimed BTI customer.

A sensible plan would be: inventory circuits, routers and VPN paths at all three sites, design SD-WAN or a written WAN with tested failover, itemize circuits, equipment, labor and support, and leave a named owner for changes and renewals.

Next step: Book a free consultation

WAN and SD-WAN in the East Valley: design, install, support and upgrade

BTI designs, installs, supports and renews WAN and SD-WAN for organizations in the East Valley, from one Phoenix office IT team. Each answer below is the short version; ask for a written quote for the details.

WAN and SD-WAN for East Valley organizations

BTI designs, installs and supports WAN and SD-WAN for organizations, including internet failover and written support after go live. This page covers design, installation and support in the East Valley. It is not a ride service, a shipping line, an electrical contractor, a generic managed IT page or BTI's Phoenix WAN page.

WAN and SD-WAN installation in the East Valley

BTI inventories circuits and equipment, writes the design, schedules the cutover and tests failover and applications before handoff for East Valley sites.

WAN support in the East Valley

After go live, BTI handles monitoring, configuration changes and circuit or license renewals for East Valley organizations, with on site visits from Phoenix when needed.

Internet failover in the East Valley

BTI designs a second path and tests failover so East Valley sites can keep working when one circuit fails, rather than discovering the gap during an outage.

WAN and SD-WAN pricing and quotes in the East Valley

Every BTI WAN proposal for East Valley organizations is itemized: circuits, equipment, labor, support and assumptions are listed separately. Ask for an itemized quote for circuits, equipment, labor and support.

WAN services near me in the East Valley

If you searched for WAN or SD-WAN near me in Chandler, Tempe, Mesa, Gilbert, Scottsdale and Queen Creek, BTI's Phoenix office is about 8 to 25 miles from most East Valley sites. This is not a ride, shipping or electrical listing.

Next step: Get a WAN and internet quote

Industries we serve with WAN and SD-WAN in the East Valley

BTI plans WAN and SD-WAN around how each industry in the East Valley actually operates.

Manufacturing and industrial plants

Chandler and Mesa plants need office and floor traffic separated where it matters, and a WAN that does not drop scanners when one circuit fails.

Warehouses and distribution

Gilbert, Mesa and Queen Creek warehouses need a tested failover path so shipping systems stay up during an outage.

Offices and campuses

Tempe and Loop 202 campuses need stable paths between buildings and to other regions, with a named owner for renewals.

Next step: Talk with an engineer about your industry

A short look at how to plan WAN and SD-WAN

This video covers how organizations plan WAN and SD-WAN. BTI applies that planning in the East Valley from the Phoenix office.

A six step buyer journey for East Valley organizations

1. Review the current circuits and paths

We inventory circuits, routers, VPNs and who owns renewals today.

2. Design WAN or SD-WAN and failover

Sites, policies, failover and acceptance tests are written down before equipment is ordered or circuits are requested.

3. Install and cut over

Equipment is installed and labeled, and the cutover is scheduled around your windows.

4. Test applications and failover

Failover is tested, not only drawn, and applications are checked before the project is called done.

5. Leave a named owner

Changes, monitoring and renewals have a named owner and a written support scope.

6. Review after go live

A follow-up reviews tickets, any misses in failover and the next site on the plan.

Next step: Book a free consultation

Building types we serve in the East Valley

Each building type in the East Valley changes the design, the launch window and the acceptance tests.

Offices and tech campuses

Office suites and tech campuses along Loop 101 and Loop 202 change how wan and sd-wan is done in the East Valley: which applications or closets matter, when work can happen and what is tested before handoff.

Manufacturing and lab buildings

Manufacturing and lab buildings in Chandler and Mesa change how wan and sd-wan is done in the East Valley: which applications or closets matter, when work can happen and what is tested before handoff.

Medical and professional buildings

Medical and professional offices in Gilbert, Mesa and Scottsdale change how wan and sd-wan is done in the East Valley: which applications or closets matter, when work can happen and what is tested before handoff.

Next step: Book a free consultation

Licensing, operating and documentation requirements in the East Valley

BTI handles the technical side of the requirements WAN and SD-WAN in the East Valley run into. BTI describes how it helps; your assessor, insurer or counsel confirms compliance.

Written design and acceptance

The design, circuits or equipment are written down so East Valley teams can show what was delivered.

Contracts, licensing and renewals

Terms and renewal dates are recorded so a site in the East Valley does not lose a path, a license or a support contract at term end.

Change control after go live

Changes for East Valley sites go through a written request, so a well meant tweak does not take a warehouse offline.

Next step: Get a WAN and internet quote

Local operating needs in the East Valley

WAN and SD-WAN for East Valley sites have to respect cutover windows, carrier dates and staff who may be 20 minutes or an hour from the Phoenix office. A named owner for renewals matters more when a warehouse in Chandler or Mesa is not next door to IT.

Next step: Book a free consultation

Signs it is time to plan WAN and SD-WAN in the East Valley

  • A second East Valley site was added and it still uses a one-off VPN that nobody documented.
  • A circuit outage left a warehouse or office unable to work, and failover had never been tested.
  • Each site has its own internet service and there is no written owner for renewals.
  • Applications in Chandler depend on a path to Tempe or Mesa that fails quietly.
  • A search for WAN in the East Valley turned up a ride service, a shipping line or an electrician, not a network path.
  • A questionnaire asked how sites stay connected during an outage, and you could not show evidence.

Next step: Book a free consultation

Monitoring, maintenance and support after go live

Sales inquiries get a reply from a BTI engineer within one business day. Managed support clients reach the team in real time by phone, and client emails get a reply within 15 minutes. 4-hour onsite emergency response is available under BTI support agreements. Emergency support is available 24/7. Call 800-435-7284.

24/7 monitoring used in WAN support for the East Valley
BTI Phoenix office inside the Iron Mountain data center, which supports WAN work in the East Valley
BTI service vans used for WAN and network work in the East Valley

Next step: Book a free consultation

Where we provide WAN and SD-WAN in the East Valley

BTI designs and supports WAN and SD-WAN across the East Valley from its Phoenix office. Sites along Loop 101, Loop 202, US-60 and I-10 are served by the same team.

Cities we serve in the East Valley

BTI also serves Queen Creek from the same Phoenix team.

See every service on the BTI East Valley hub page.

Related services in the East Valley

BTI Communications Group Phoenix office

615 N 48th St, Suite 1048
Phoenix, AZ 85008 (inside the Iron Mountain data center)
IT team: 480-272-8728
Office: 602-733-6807
Office hours: open 24/7. Emergency support is available 24/7. Call 800-435-7284.

Our Phoenix office is about 8 to 25 miles from most sites in the East Valley. 4-hour onsite emergency response is available under BTI support agreements.

WAN and SD-WAN in the East Valley: frequently asked questions

Yes. BTI designs, installs and supports WAN and SD-WAN for organizations in the East Valley, from the Phoenix office.

Yes. BTI designs, installs and supports WAN and SD-WAN across the East Valley from the Phoenix office, about 8 to 25 miles from most sites.

Yes. Support, monitoring and changes are written into the agreement. 4-hour onsite emergency response is available under BTI support agreements.

When it is in scope, yes. Failover is designed, itemized and tested, not only drawn on a diagram.

Cost depends on the sites, the circuits, the equipment and the support scope. BTI provides an itemized quote.

Yes. BTI designs and supports WAN and SD-WAN across the East Valley from the Phoenix office, about 8 to 25 miles from most sites.

Yes. BTI provides wan and sd-wan for manufacturing and industrial plants in the East Valley, from the Phoenix office.

Yes. BTI provides wan and sd-wan for warehouses and distribution in the East Valley, from the Phoenix office.

Yes. BTI provides wan and sd-wan for offices and campuses in the East Valley, from the Phoenix office.

Yes. BTI provides wan and sd-wan for office suites and tech campuses along loop 101 and loop 202 and similar sites in the East Valley, with a written plan and a test or handoff before the work is called done.

Yes. BTI provides wan and sd-wan for manufacturing and lab buildings in chandler and mesa and similar sites in the East Valley, with a written plan and a test or handoff before the work is called done.

Yes. BTI provides wan and sd-wan for medical and professional offices in gilbert, mesa and scottsdale and similar sites in the East Valley, with a written plan and a test or handoff before the work is called done.

Yes. The design, itemized proposal and acceptance tests are written down and left with a named owner.

Yes. Renewal dates and terms are written into the support scope so a circuit, license or contract is not a surprise.

Changes go through a written request under the support agreement, with a window and a rollback plan when the change is significant.

A modest three-site design can move from survey to cutover in a matter of weeks once circuits and equipment dates are known. Timelines depend on carriers, building access and the cutover window you can accept.

No. This page is WAN and SD-WAN, the network paths between East Valley sites. It is not East Valley Rides, a shipping line or an electrical contractor.

No. This page is WAN and SD-WAN. East Valley network design, network installation and other IT services have their own pages, and they are linked rather than folded into this one.

Every proposal is itemized for the sites, circuits, equipment, labor and support in scope. Pricing comes from a site review and a written quote.

Yes. BTI designs, installs and supports WAN and SD-WAN in Chandler, Tempe, Mesa, Gilbert, Scottsdale, Queen Creek and nearby communities, from our Phoenix office about 8 to 25 miles away.

No. This page is WAN and SD-WAN for organizations, the network paths between sites. It is not a ride service, a shipping line or an electrical contractor.

No. This page is WAN and SD-WAN for East Valley organizations. Local network design and network installation have their own East Valley pages, and metro-wide WAN terms belong on BTI’s Phoenix WAN page. Those pages are linked, not replaced, by this one.

Call the Phoenix IT team at 480-272-8728. Emergency support is available 24/7. Call 800-435-7284.

BTI Communications Group’s Phoenix office is inside the Iron Mountain data center at 615 N 48th St, Suite 1048, Phoenix, AZ 85008. The office is open 24/7. Call the IT team at 480-272-8728. Emergency support is available 24/7. Call 800-435-7284.

4-hour onsite emergency response is available under BTI support agreements. The terms for your sites are written into the agreement.

Buyer's Guide Resources

WAN and SD-WAN Buyer's Guide for the East Valley

WAN diagram used in WAN and SD-WAN planning in the East Valley

How to plan WAN and SD-WAN in the East Valley

Use this Buyer’s Guide to plan WAN and SD-WAN in the East Valley. Start with the sites, the circuits you have, the failover you need and who will own renewals. Ask for an itemized quote for circuits, equipment, labor and support. 4-hour onsite emergency response is available under BTI support agreements.

Client stories

The kind of partner East Valley businesses stay with

Dave Tourjé
Dave Tourjé
★★★★★
The entire team at BTI that I had the pleasure of working with exceeded my expectations. They tool my company to the technology and security level I needed. They were always very attentive and responsive if we had any questions. Would highly recommend!
Rebecca Gadomski
Rebecca Gadomski
★★★★★
BTI has been exactly what our growing company has needed for so long! They provide friendly, professional service and have consistently been willing to go above and beyond to ensure our complete satisfaction. Would highly recommend and happy to talk with anyone who has questions and would like more feedback on their exceptional service.
Bob Bullock
Bob Bullock
★★★★★
BTI Communications Group does a solid job. From the proposal process straight through to job completion and subsequent support, everyone does exactly what they say they will. We had a solution installed at one location as a test of sorts. Based on the success of that, we are now getting ready to install at a third location.
 Jeff Valencia
Jeff Valencia
★★★★★
Very friendly staff! Jodi was able to provide us support by scheduling a tech out for a job walk the same day as requested. She has been proactive and responsive, which is greatly appreciated. Thanks Jodi!
 Jorge Fonseca
Jorge Fonseca
★★★★★
Great Company! Amazing service and friendly staff!
Michael Gadomski
Michael Gadomski
★★★★★
Dave and his BTI Team have been a great resource to help our growing business succeed. He continues to be responsive with providing the support that we need from initial setup to modifications of our current system in a timely manner. Dave has created a friendly and encouraging relationship which has been recognized by the Edgewood staff as well. His team has been an asset to Edgewood.
Andy Wieser
Andy Wieser
★★★★★
Very responsive and good at troubleshooting/problem solving.
Service Areas

BTI provides WAN and SD-WAN in the East Valley

Chandler

Providing WAN and SD-WAN design, installation and support in Chandler, Gilbert and Queen Creek and nearby East Valley communities, from our Phoenix office.

Tempe

Providing WAN and SD-WAN design, installation and support in Tempe and the ASU area and nearby East Valley communities, from our Phoenix office.

Mesa

Providing WAN and SD-WAN design, installation and support in Mesa, Gilbert and Apache Junction and nearby East Valley communities, from our Phoenix office.

Scottsdale

Providing WAN and SD-WAN design, installation and support in Scottsdale and Paradise Valley and nearby East Valley communities, from our Phoenix office.

BTI Phoenix office

Why East Valley organizations choose BTI for WAN and SD-WAN

BTI designs, installs and supports WAN and SD-WAN for the East Valley, with support from the Phoenix office. Here is what that means in practice.

Over 40 years in business

BTI Communications Group has over 40 years in business technology, with offices in Phoenix, Los Angeles and Chicagoland.

WAN and SD-WAN

BTI designs, installs and supports WAN and SD-WAN for organizations, including internet failover and written support after go live.

Local Phoenix office

East Valley work is supported from BTI's Phoenix office, about 8 to 25 miles from most sites.

24/7 NOC/SOC

BTI's 24/7 NOC/SOC has handled 10,000+ alerts with zero missed, and it watches system health so problems are caught early.

4-hour onsite emergency response under BTI support agreements

For the East Valley, technicians come from the Phoenix office, about 8 to 25 miles away. Call the Phoenix IT team at 480-272-8728 or see reviews on BTI Phoenix on Google Maps.

ISO 27001 compliant and ISNetworld member

BTI's own policies and controls are ISO 27001 compliant through the TAG ISO 27001 Compliance Program, and BTI is an ISNetworld member and GSA contract holder (47QTCA21D00BA).

Ready to plan WAN and SD-WAN in the East Valley?

Talk with BTI's Phoenix IT team about your sites, circuits and schedule. You get a written, itemized recommendation.

Emergency support is available 24/7. Call 800-435-7284.

Ready to plan WAN and SD-WAN in the East Valley?

Talk with BTI's Phoenix IT team about your sites, circuits and schedule. You get a written, itemized recommendation.

Emergency support is available 24/7. Call 800-435-7284.

IT Services

Let's Start a Conversation

What's the best way for us to contact you?

Top quality brands, expert engineering, transparent cost, and measurable ROI.